Professional Camera Slider Dollies and Rover Dolly Systems

Unique Technology in Camera Slider and Dolly Design

The systems in our MYT family of camera sliders represent a unique technology that radically departs from traditional camera dolly design.

Our patented 3-in-1 system comprises three main components: camera slider track in a length of your choice; wheeled rover dolly with foam rubber wheels; and a cross-compatible camera hi-hat with a bowl or plate mount of your choice.

Our one-latch hi-hat release enables operators to:
- use the camera hi-hat on the slider dolly, flip the latch and lift the hi-hat (fully mounted with camera) from the track
- use the hi-hat as a stand-alone camera support
- take the hi-hat and mount it with the same locking latch on the rover dolly, which is great for low profile shots and rolls smoothly on a wide variety of surfaces
- you can even have multiple camera hi-hat assemblies with various tripod head mounts, fully assembled and ready to use in tandem

We started from the ground up, basing our sliders on a dual extrusion track that is far stronger than the aluminum or stainless steel rails most systems rely on. These tracks are exceptionally strong and far more rigid, boasting imperceptible deflection even with a full camera load at the center. This approach offers many advantages, not least of which being the smoother motion consistency throughout the track length. The strength of the rails also opens up a wider range of support options, and frees operators from the hassle of center mounting.

Our patent-pending bearing design features components of incredible precision, machined to the highest tolerances. Our bearing block is a true industry-first combination of a captive sleeve and proprietary wheel housed to glide on the track. This design allows for an unbelievably smooth motion that is also completely free of the back-and-forth rocking found on most other sliders. Also very important is the clean start and stop on our sliders, which represents what we at MYT consider to be one of the most important aspects of a camera slider.

Some further features of our bearing design:
- braking system that is transferable between the four bearings on each slider
- removable protective cap on the top of each bearing allows for incredibly easy cleaning
- floating design on stainless steel dowel pins that accommodates any variation in temperature and compression/expansion differential
- protective sleeves for the rails
- lubrication-free system with easy maintenance

Our camera hi-hats are based on a modular design that allows for variance in your camera and video head setup. Raise or lower your mount by swapping out the rods on your hi-hat; deconstruct the hi-hat and change your mount to accommodate a different head; eliminate the handle bracket to attain a lower-profile mount; and more! Mounts available in 75mm, 100mm, 150mm bowls, Mitchell mount and Flat mount styles.

Our MYT Glide camera sliders can be mounted in a wide variety of configurations designed to meet every operating need, from the lowest point to the highest. Some examples:

- 5/8” stud receiver located on both the structural bridge plates sandwiched between the rails, each featuring a protective stud cap that prevents the stand from interfering with the carriage motion
- 3/8” female threads to accept any half-ball adapter on each SP plate
- option to mount a half-ball adapter with M6 threaded screws in the triangular through-hole pattern on the SP plates, which provides additional stability

- low profile support with 3/8” threaded baby feet in 1” lengths
- aluminum end trusses option which provide additional mounting solutions, including 45° baby feet receivers; height and angle adjustable rosette leg adapters; outside-track light stand adapters; and direct surface mounting with the grippy rubber buttons on the underside of each truss
- dynamic plate option for Medium and Large sliders which mounts on the underside of the rails and can be supported with a tripod, allowing the operator to position the slider track without moving the tripod support
- underslung adapter kit for Medium and Large slider systems which positions your camera hi-hat, head, and camera setup underneath the slider

There are a wide variety of accessories mounting options on each of the supporting cheese plates on our camera sliders, including ¼-20”, 3/8”, and ½-13” thread receivers. The same holes are likewise sprinkled on our camera hi-hat, aluminum end trusses, and full array of accessories to allow for any configuration an operator could require.

Check out our store to learn more, or give us a call at 212-257-0505!

Some Basic Info on MYT Works' Glide Line of Pro Sliders and Rover Dollies

Our MYT Glide Line of professional camera sliders represents the latest and most advanced approach to camera tracking technology. From the well-respected sliders and rover dollies we've been manufacturing and delivering since 2010, to the exciting new systems we are refining like our high-end GlideStream slider, we offer the most cutting edge solutions for your motion needs. MYT Works is focused on creating the strongest, smoothest, and most portable camera dolly systems available today.

Check out our store to learn more, or give us a call at 212-257-0505!

Product Videos for our Camera Sliders, Dollies, and Hi-Hats

Camera Compatibility Graph - Find the Right Slider for You!

Camera Glider Specs

Graphic for our Camera Sliders Indicating Support Plates and Features

Glide specs for website

Request Info from MYT Works

Thanks for visiting us! We'd love to hear from you. Please fill out this brief form and someone will contact you shortly for a consultation. If you don't like forms, feel free to call us at 877-682-1797 or send us a message at info@mytworks.com and we can chat.

* Fields are required